ADVANCED GROWING METHODS Pushing Your Grow to the Max
ABSTRACT:
The advanced grower can employ certain methods which will greatly increase yield and quality. Indoor gardening is ALL about emulating the perfect outdoor environment, day and night, for the plants. Light will ALWAYS be the limiting factor indoors, since it does not come from a 360° source and is not as bright or as “nutritious” for plants as the Sun is. The spectrum put off by grow lights pales in comparison to natural sunlight. Therefore an indoor gardener needs to dial in all other variables to a precise degree. Not only can the factors needed for the ideal day be created and maintained, but the ideal season can be created as well. This info sheet on “Advanced Growing” will address all these factors below. Please refer to “Best Overall System Intergration,” “Why Run Drain to Waste,” “Reservoir and Management,” and “Maintaining a Healthy Root Zone,” for a more complete picture of how to run an ideal system. We also suggest you ask for an updated ”Nutrient Recipe” (for your nutrient of choice) and “Nutrient Schedule” as well.Key Points Towards a More Advanced Garden
- Hierarchy of factors contributing to a Larger Yield
- Cut The Concentration of Additives Down
- In general a Healthy Reservoir should bring the T.D.S. (ppms) down every day
- Changing Nutrient Solution regularly and making sure to FLUSH
- Nutrient Feeding Chart/Graph
- Creating a Seasonal Shift during Late Bloom from “Late Fall” to “Early Winter
- Lower Day/Night Room Temperatures during the last three weeks
- Raise lights last two weeks
- Use a Chiller to create a “Frost” at the Root Zone
- Using Finishing Agents to aid into the fi nal transition (ripening) phase
- Optimum Temperatures/Humidity - Day and night
- Trellis Netting and Overall “Full” Fruit Coverage
Hierarchy of Factors Contributing to a Larger Yield
There are many environmental factors that contribute to healthy plant growth. In general if you take care of your garden and dial in your environment and your nutrient scheduling, your plants will fl ourish. And if your plants fl ourish and remain healthy throughout their entire life cycle—your yield will surely rise and eventually soar. This section is concerned with yield, not so much with other more authentic attributes or plant/fruit/fl ower quality. Here is a list of factors in order from most important to least important that contribute to fi nal yield of fruit/fl owers:
- Light - Directly proportional to fi nal yield. More Light = More Yield (up to a point of obvious burning.)
- Aeration to the Root Zone - More air (O2) to the roots the better. It is almost impossible to provide too much.
- Carbon Dioxide - CO2 can be used at up to 4X what is found at normal atmospheric levels - 1500 ppm is ideal.
- Temperature - Keeping the temperature at 76°F - 78°F. (with 1500 ppms CO2 at 86°F is optimum.) - See below for more exact temperature measurements for each phase of growth.
- Humidity - Keeping it between 45-65%. 65% humidity in Vegetative phase and 45-55% in Bloom Phase.
- Nutrients - most people think this is the most important thing. It isn’t. Keep nutrient TDS (ppm) levels in check. - Make sure to NOT overdose additives. So many to choose from these days. Easy to get confused.
As you can see nutrients (additives) are at the bottom of this list, and we don’t want you to get the idea that “all nutrients are created equal” (see our info sheet on nutrients or on chealators, etc.) or that no additives can greatly increase your yield or available fragrance; because that would be far from the truth. But what we are trying to say is that NO amount of nutrient or additives will make up for a lack of oxygen to the root system or a poorly designed grow space that runs too hot or does NOT exchange the air within the space often enough. Many inexperienced growers skimp on the basics and then try and make up for it with the newest “magic bullet” additive on the market.
We Suggest: Add additives at ¼ strength to be safe at fi rst then increase the dosage by ¼ the next week until you have a good understanding and feeling of what this additive is doing.
In general a healthy recirculating reservoir should bring the TDS (ppms) down every day. The total concentration of nutrient should always be relatively stable within your reservoir. Ideally plants should take up an even amount of nutrient and water. In reality, this rarely actually happens. Plants will take up either more nutrient or more water and will leave the reservoir solution out of balance. This being said, a sophisticated grower can tell a lot from his reservoir solution and its fl uctuations. If the ppms of the solution have gone up this means that there is less water in solution. The water has either evaporated or the plants have taken up more water than nutrient since the last time the reservoir was checked, or both water has evaporated and the plants have taken up more water than nutrient. If the reverse has happened and the ppms of the solution have fallen, than it is easy to glean that the plants have taken up more nutrient than water from the reservoir. What we do NOT want are major fl uctuations in either direction. If a reservoir’s ppms go up slightly it is usually because the concentration of nutrients in solution (TDS) are too high. This is not always a bad thing. During weeks 4-6 we are trying to push as much food (nutrients and additives) into the plants as possible and if the ppms go up slightly (every day) this indicates to us that we are pushing them as hard as possible. In general though we want the ppms to lower, slightly— indicating to us that the plants have all that they need and are content to drink slightly more water than nutrient. Ideally, we are looking for the reservoir solution to sway no more than 25-50 ppms every day. (If running Drain to Waste–disregard this paragraph.)
Changing Nutrient Solution Regularly and Making Sure to FLUSH
It is important to change out your nutrient solution on a weekly basis (at least). This will ensure that all stays fresh and few if any parcipitates have a chance to form. It is also important to fl ush on a regular basis (especially if you are growing in coco, rockwool, or soil.) Please check our info sheets on “Flushing” and “Reservoir Maintenance” for more details.
Nutrient Feeding Chart/Graph
Learning to read one of these graphs is a very important step towards becoming a successful grower. Not only are the overall TDS numbers for each week of the bloom phase (and veg. phase–depending on what graph you are looking at) indicated on this chart below, but one can take in more information that’s easy to see as the weeks progress, the TDS values slowly rise. But how fast are they rising? Well, on the chart below they are going up 100ppms every week. A good grower can take the ppms up by 200-300 ppms per week! You can also see that this chart started the bloom phase at 1200 ppms which can be considered as pretty high. To us it is just “average.” Some bloom feeding schedules have growers starting the bloom phase at 1300-1400 ppms. You can also see that at weeks 5-6 we have peaked out on our TDS (ppms). After this point, for week 7 and then week 8 (on the graph) the ppms are going down dramatically. This adds to the factors (listed on the next page) that signal to the plant it is time to fi nish (ripen). It also allows for a healthy flushing of all minerals.
Cut The Concentration of Additives Down
With so many additives available today, and so many additives coming to the market place every month, it is extremely tempting to use an ever-growing amount of them. This can be extremely catastrophic to your plants’ root systems as well as your plants’ overall health and vigor. There are so many products out there from diff erent companies touting the fact that they “increase the plants metabolism” or “help with nutrient uptake,” that it is increasingly easier to add two of the same product (from diff erent manufacturers). If both products are applied at their full strengths or even ½ strengths each plants can be “stressed” or worse still “burned” or even straight up killed. Make sure you research what you are adding and have at least a cursory understanding of what you are giving your babies.
Creating a Seasonal Shift During Late Bloom from “Late Fall” to “Early Winter
This shift will help plants understand that their time is coming to an end. Your plants will move all remaining sugars from all other parts of the plant to the fruit/fl owers that they have been working on creating. They will ripen all fruit and create more oil/sugar/ resin. Plants that are fully fi nished will have more overall weight in their fruit and fl owers as well. As Plants fi nish up, it is natural and expected to see “fall colors” come out in leaves. During the last 2-3 weeks we are looking for reds, yellows, and purples—this is not to be mistaken for a “bad thing”. It is a sign that all is working as planned.
Lower Day/Night Room Temperatures During the Last Three Weeks
The last three weeks should have a pronounced eff ect on your plants. Plants communicate through hormones and other signal proteins. In order for them to create these crucial chemical signals indicating to the fruit and fl owers to ripen, plants need to receive environmental cues. These cues tell them the season and let them know that it is time to fi nish up. By following these guides, we are creating an onslaught of cues letting them know that it is that time and that they need to let the hormones fl y. Three weeks before fi nishing (the beginning of week 6 on an eight week fruit/fl ower cycle) day temperatures should drop 4-5º F. from where they have been. Night-time diff erential should be 10º F. two weeks before fi nishing we want the day time temps to be another 4-5 degrees less than week 6. Night time diff erential should be 15º (Around 55-60º F if possible.) For the fi nal week, we want day time temperature to be 70º F. and night time temperature to be as close to 50º as possible. This will help force the plants to ripen—changing colors whenever possible, and maximizing fl avor and aroma.
Raise or Dim Lights During the Last Two weeks
Again, to help make this seasonal shift a reality for your plants, you should raise your lights up 4-6 inches (4” for a 600 watt and 6” for a 1000 watt,) every week for the last two weeks. This will help create more compact and dense fruit clusters while further increasing the ripening process. When using newer light technology, like LED lights, dimming the lights will also achieve the same results. Dim lights 20% on the second to last week and 40% for the last week.
Using a Water Chiller to Create a Late Bloom “Frost” at the Root Zone
As said before in previous Info Sheets, it is of critical importance for a healthy root zone that water temperatures stay at 66°F - 68°F. This does not mean that they can sometimes be between this temp zone and sometimes hotter or colder than this temperature. It is about consistently staying at 66°F - 68°F At this level, the nutrient solution holds a good amount of oxygen within it, and the nutrient absorption rates are still high enough for most plants. These lower water temperatures will also help promote aerobic benefi cial microbes growth and allow them to give BIG returns to your precious plants.
By lowering the water Temperature during the fi nal two weeks, a water chiller may also be employed to create a “frost” at the root zone as well. You will help your indoor plants make a transition into late Fall and let them know that it is time to fi nish up for “harvest time”. Assuming that you have an eight-week fruiting/fl owering plant (like most tomatoes, cucumbers, and peppers—as well as many other favorite plants are)—at the beginning of week 7, make sure to lower your water temperature from 66°F - 68°F down to 62°F - 64°F. Then again, at the beginning of week 8, lower the water temperatures down to 55°F - 57°F. For the fi nal days, bring the water chiller down to 45°F - 47°F. This will signal the plant that the fi rst frost has arrived and that it is time to squeeze out any remaining “juice” and send it up into the fruit and fl owers. The temperatures listed here are only an indication of where you want to actually be. All plants will respond diff erently. Feel free to experiment.
Using Finishing Agents to Aid Into the Final Transition (Ripening) Phase
Grand Finale and Purple Maxx will make for a more pronounced transition into the late-Fall early-winter period that we are looking for. Grand Finale uses tons of high brix sugars coupled with Magnesium sulfate to bring out more fl avor in your fi nal 2 weeks. This will remove any residual chlorophyll from the taste of your fruits (chlorophyll is what is responsible for creating a grassy fragrance, and taste residue). Purple Maxx will help bring out way more oil/sugar/resin, and if the plant has it in its genetic composition, will bring out purple colors as well.
Temperature/Humidity CO2 Schedule for Bloom (Fruit/Flower) Stage of Plant Growth
This assumes that you have an eight week “fruiting” plant such as most strains of tomatoes, cucumbers, or peppers—as well as many other of your favorite plants.
Week 2-5 of Vegetative Growth
Day Temp - 76°F - 78° (86°F with CO2 @ 1500 PPMs)
- Please note if running CO2 do not up to 1500 PPMs until 2nd Week
- Keep Temps at 76°F - 78°F for 1st week of Veg.
Humidity - 60-65%
CO2 Levels - 1500 PPMs (after 1st week of Veg.)
Week 1-5 of Bloom (Fruit/Flower Stage)
Day Temp - 76°F - 78° (86°F with CO2 @ 1500 PPMs)
Night Temp - 70°F (79°F with CO2)
Humidity - 50-55% (unless plant type likes it higher)
CO2 Levels - 1500 PPMs
Week 6 of Bloom
Day Temp - 72-75°F (74-75°F with CO2 @ 700 PPMs)
Night Temp - 65°F
Humidity - 50% humidity
CO2 levels - 700 PPMs
Week 7 of Bloom
Day Temp - 70°F - 73°F (72°F - 74°F with CO2 @ 500-700 PPMs)
Night Temp - 60°F (even 55°F if you can go this low)
Humidity - 50%
CO2 Levels - 500-700 PPMs
Week 8 of Bloom (Final Week)
Day Temp - 70°F - 72°F (70°F - 72°F - with CO2 at 500 PPMs or turn CO2 OFF!)
Night Temp - 50°F (if you can go that low)
Humidity - 50%
CO2 Levels - 500 PPMs
Trellis Net for Optimum Yield
We believe a trellis-net is the best way to grow. As opposed to bamboo stakes or plastic cages, the trellis can easily provide support for branches and main stalks while providing for an easy way to bend and weave the growth of larger plants providing for an equal amount of light to all fruiting/fl owering zones. In a trellis your fruit should be very close together (but not touching). Your lights will cover a certain area (depending on size and refl ector) and it’s your job as a grower to make sure that whenever there is light there is fruit growing.